Magnetic Ceramic Bath Rails for the Aerosol Industry
Early bath rails were made from Alnico horseshoe magnets which later evolved into more economical Ceramic Rail assemblies for holding down aerosol cans in heated water baths as a quality check for leakers and empty cans. Today, Bunting Magnetics Co. makes the most popular Magnetic Test Bath Rails in the Industry. Our rails are designed and manufactured for either a single or a dual lane chain for maximum hold down and are engineered and designed for your tank, your chain and your application.
Single Lane Magnetic Test Bath Rails
Usually used for a single lane of larger cans through the test bath. This means cans like propane bottles, large spray paint cans, lubricants or adhesives. These 2-pole magnetic rails are normally stronger than the dual lane magnetic systems because we are handling the larger cans. They usually run with 4-1/2″ to 7″ plastic or stainless steel table top chains and have the center gap directly below the cans for the lug of the chain to ride in through the tank.
Dual Lane Magnetic Test Bath Rails
Designed for two lanes of smaller cans through the test bath. This usually means smaller cans of hair sprays, cooking sprays, adhesives and lubricants. These 4-pole magnetic rails are designed and manufactured to handle two lanes of smaller cans on a 7-1/2″ plastic or stainless steel table top chain. Here the center gap in the rails for the chain lug is between the two lanes of cans.