ProductsIndustries View Our Catalogs
Request a Quote

Get in touch with us at our toll-free number 1-800-835-2526 or request a quote here:

Talk to an expert

Getting Metal Out of Petfood

A Guide to the Ideal Location for Magnetic Separators and Metal Detectors in a Petfood Processing Plant

Ensuring Petfood is metal free before it reaches the consumer is critical. To assist processors and producers, Bunting® Magnetics Co. has developed a series of typical plant flowsheets showing proposed locations for Magnetic Separators and Metal Detectors. This flowsheet is a typical Petfood Processing Plant – showing material being fed into the plant through to packaging and shipment to retailers. The type and location of the Metal Separation equipment is detailed as follows:

1.     Infeed Material
Dry Side – Dry materials are often fed into the plant from transportation via a pneumatic line. To remove ferrous metals (eg nuts, bolts, nails, etc) then a Pneumatic Inline Magnet is recommended. Additionally, after storage in the primary silo, the dry material is passed through a Plate Housing Magnet before being mixed with any other materials, such as meat;

Meat Side – After discharge from the transportation, material is commonly fed up a conveyor. Positioned above the conveyor to lift and remove larger ferrous metal is a Suspended Plate Magnet and this is then followed by a Metron C Metal Detector to identify any non-ferrous metals such as stainless steel. This ensures that no metal is fed into the grinder where is could damage equipment and also be fragmented into smaller parts that are more difficult to detect and remove;

2.     After First Stage Mixing
After mixing, when the material is now in a slurry form, a Magnetic Liquid Trap with high strength Rare Earth Magnets is ideal to remove any smaller ferrous metals and any metal that originates from the wear of processing equipment;

3.      On the Wet Line prior to Canning
To ensure a metal-free product prior to canning, a P-Tron-O Metal Detector can be used on the line to detect and remove smaller ferrous and non-ferrous metals;

4.      On the Dry Line prior to Bagging
After extrusion and just prior to bagging or insertion into cartons or boxes, a Quicktron Metal Detector is ideal to detect and remove any smaller remaining ferrous and non-ferrous metals;

As a final check, the filled and sealed bags are commonly passed through a Metron C Metal Detector which can detect metal inside a package;

The type and design of Magnetic Separator and Metal Detector and the recommended location has been determined following several decades of working with food producers and processors all over the world. There are always variations to plant designs and layouts that mean different types of Metal Separation equipment is needed and an onsite review by a Bunting® Magnetics Co. engineer will help ascertain the best solution.

Click the image below to learn more about the Perfect Petfood Plant. Our other “Perfect Plant” diagrams can be found HERE.

For more information please contact us at:
Phone: 1-800-835-2526